Fence Installation – Complete Work Description

Scope of Work

• Site Preparation:

  • Inspect property boundaries and confirm layout with the client.

  • Clear installation area of debris, vegetation, or obstructions.

  • Mark fence line with stakes and string for accuracy.

• Post Setting:

  • Dig holes at specified intervals (typically 6–8 feet apart, depending on fence type).

  • Ensure depth meets code/structural requirements (usually 1/3 of post height in ground, or as per local regulations).

  • Place posts in concrete or compacted gravel for stability.

  • Align and level posts vertically and horizontally.

• Panel/Board Installation:

  • Attach rails, panels, pickets, or boards depending on fence style (wood, vinyl, chain-link, aluminum, etc.).

  • Secure with appropriate fasteners and hardware.

  • Maintain consistent height, spacing, and alignment along the full length.

• Gate Installation:

  • Install gates at designated locations with hinges, latches, and posts reinforced for weight.

  • Ensure gates open/close smoothly and are properly aligned.

• Finishing Work:

  • Trim or cut posts to uniform height (if applicable).

  • Apply caps, paint, stain, or protective coatings as specified.

  • Remove construction debris and leave the site clean.

Materials & Equipment

• Fence posts, panels/boards/rails, gates, hinges, latches, caps.

• Concrete, gravel, fasteners, brackets, and other hardware.

• Tools: augers, post-hole diggers, level, measuring tape, saws, drills, safety gear.

Quality & Safety Standards

• All work will comply with local building codes and property line regulations.

• Posts set for maximum strength and durability.

• Materials installed per manufacturer specifications.

• Safety procedures followed during excavation, lifting, and tool use.

Completion

• Fence line checked for straightness, alignment, and structural integrity.

• Gates tested for smooth operation.

• Final walkthrough with the client for approval.